The load turning device manufacturer, according to the different slings used, the car plate load turning device can be divided into chain type load turning device and belt type load turning device. The overturning machine produced by us is used with traveling crane. It can automatically overturn the machine 180 degrees or 360 degrees, and the middle spacing can be adjusted! The turntable can meet the engineering turning requirements of goods of different specifications, and provide process transportation safely, stably and effectively. It is widely used in metallurgy, stamping, sheet metal, mould, papermaking, refrigeration, steel strip, wire reel, barrel material, coil material and other industries. Large round parts often need to be turned over in the process of transportation and processing. The traditional method generally uses the crown block of the workshop to turn over, and the main tool is steel wire rope. Due to the large size and heavy weight of large circular and simple parts, it is very difficult or even impossible to turn the crown block during processing and transportation. Moreover, this hoisting and transportation method will cause damage to the finished cylindrical parts, and sometimes even pose a threat to the safety of parts, equipment and personnel due to the damage of hoisting wire rope. The frame turnover machine shall turn the frame and other assembly connected assemblies 180 degrees on the general assembly line, and the turned frame shall be placed upright to meet the subsequent assembly process. In the turnover station, the load turning device should not only hang and lift the frame and assembly connecting assemblies weighing several tons, but also turn them over. For the frame turnover machine, the use frequency and dynamic load strength on the assembly line are large.