Clean Room Overhead Crane for Medical Pharmaceuticals Industry
Serving a wide range of industries, from waste water treatment and ash handling to aerospace and shipping, our team can easily meet various industry-specific compliance and regulations.The whole complete crane structure was welded by stainless steel.
Clean Room Basics:
Products with sensitive components and production processes often require the use of hygienic rooms during the manufacturing process; these environments are kept free from dust, airborne microbes, chemical vapors, and other environmental contaminants.
Depending on the application, a specified level of contamination is set and must be adhered to.
Before the International Standards Organization (ISO) adopted standards, nearly all sanitary rooms were governed by GB5033-2002(100000 grade), which specifies cleanliness classification levels.
International standard ISO 14644-2, which is expected to eventually completely replace FS209E, describes the type and frequency of testing needed to meet certain standards and is the most common standard used today.
It is applied to be used in the following industries:
Food and beverage
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Advantages of a single girder design:
1)Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the bridge and runway beams.
2)Most economical option for light to medium-duty cranes
3)Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing roof structure without the use of additional support columns.
4)Better hook approach for both trolley travel and bridge travel
5)Easier to install, service, and maintain
6)Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
7)Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
8)Great for facilities with low headroom