Electronic cleanroom crane factory sales
The cleanroom crane in the electronic workshop is a common material lifting tool in the electronic production workshop. The electronic workshop should pay attention to the avoidance of dust during production. The current specifications are required for the equipment in the workshop. should not be greater than
1. The full coverage ratio of the vertical flow clean room in the clean room of the electronic manufacturing factory should not be less than 60%, and the horizontal one-way flow clean room should not be less than 40%, otherwise it will be a local one-way flow
2. The static pressure difference between the clean room and the outdoor of the electronic manufacturing plant should not be less than 10Pa, and the static pressure difference between the clean area and the non-clean area with different air cleanliness should not be less than
3. The amount of fresh air in the 10,000-class clean room in the electronics manufacturing industry should take the maximum value of the following two items
4. Compensate the indoor exhaust air volume and the sum of the fresh air volume required to maintain the indoor positive pressure value
5. Ensure that the amount of fresh air per person per hour in the clean room is not less than 40 square meters. Dust-free driving is a necessary hoisting machine in the clean room.
0086-13390692151